چکش اشمیت دیجیتال مدل HT 225E ساخت کمپانی PCE آلمان

چکش اشمیت دیجیتال مدل HT 225E ساخت کمپانی  PCE آلمان به همراه سنگ سمباده، کابل USB ، نرم افزار، کیف حمل

مشخصات فنی:   انرژی سینماتیک اسمی: 2207 J ثابت فنر:  785 N/m انبساط فنر:  75 mm ±0.3 mm شعاع نوک کروی :  25 mm ±1 mm دارای پورت USB دارای نرم افزار دارای حافظه ذخیره 200

گروه داده ابعاد :   54  × 280 mm وزن : 1.1 kg

*** لازم به ذکر است که شرکت پترو پژوهش خاورمیانه ا نماینده انحصاری کمپانی PCE آلمان در ایران می باشد و خدمات پس از فروش و گارانتی را به مشتریان خود ارائه می دهد ****


Cement Testing Hammer PCE-HT 225E
leak-detector with digital camera / continuous measurement /
adjustable intensity 50 ... 110 dB / battery operation / incl. report software


The digital cement testing hammer PCE-HT 225E is designed for measurements of compression resistance on cement and a non-destructive material testing to determine the cement quality. The digital cement testing hammer features an electric transformer which converts the number of rebounds into a measurement value, that is then shown on a display that is fully integrated into the cement testing hammer. Furthermore the USB interface of the cement testing hammer PCE-HT 225E allows a transfer of the measured data to a computer. Thus the operator can fully concentrate on the test results, instead of simultaneously generating a time-consuming protocol. Due to the software the developed data can be downloaded from the cement testing hammer within short time, in order to process those. By means of the digital testing hammer various parameters, e.g. lay direction, deformation factor, time factor, and carbonizing can be easily set. The digital cement testing hammer additionally features a digital voice which vocalizes the determined results in English. This facilitates testing on locations that are hard to reach so that the display cannot be seen during testing. If there are any questions about this Cement Testing Hammer PCE-HT 225E, please have a look at the technical specification below or call: UK customers +44(0) 23 809 870 30 / US customers +1-410-387-7703 0. Our technicians and engineers will gladly advise you regarding all cement testers and all products in the field of measuring instruments, regulation and control and scales.


- Digital LCD display
- Digital voice function
- Incl. software for data processing

- USB interface
- Data storage for 200 values
- Non-destructive measurement

 

Cement Testing Hammer PCE-HT 225E
leak-detector with digital camera / continuous measurement / 
adjustable intensity 50 ... 110 dB / battery operation / incl. report software

The digital cement testing hammer PCE-HT 225E is designed for measurements of compression resistance on cement and a non-destructive material testing to determine the cement quality. The digital cement testing hammer features an electric transformer which converts the number of rebounds into a measurement value, that is then shown on a display that is fully integrated into the cement testing hammer. Furthermore the USB interface of the cement testing hammer PCE-HT 225E allows a transfer of the measured data to a computer. Thus the operator can fully concentrate on the test results, instead of simultaneously generating a time-consuming protocol. Due to the software the developed data can be downloaded from the cement testing hammer within short time, in order to process those. By means of the digital testing hammer various parameters, e.g. lay direction, deformation factor, time factor, and carbonizing can be easily set. The digital cement testing hammer additionally features a digital voice which vocalizes the determined results in English. This facilitates testing on locations that are hard to reach so that the display cannot be seen during testing. If there are any questions about this Cement Testing Hammer PCE-HT 225E, please have a look at the technical specification below or call:  UK customers +44(0) 23 809 870 30 /  US customers +1-410-387-7703 0. Our technicians and engineers will gladly advise you regarding all cement testers and all products in the field of measuring instrumentsregulation and control and scales.

- Digital LCD display
- Digital voice function
- Incl. software for data processing

- USB interface
- Data storage for 200 values
- Non-destructive measurement

 

Technical Specifications of the Cement Testing Hammer

Nominal cinematic energy

2,207 J (2,207 Nm)

Spring constant

785 N/m

Expansion of spring

75 mm ± 0,3 mm

Calibration value (to calibration norm)

80 ± 2

Radius of spherical tip

25 mm ± 1 mm

Interface

USB 2.0

Data storage capacity

for more than 200 values

Display

LCD, 176 x 220

Power Supply

4 x AAA alkaline batteries

Weight

1.1 kg

Dimensions

Ø 54 x 280 mm

 

Images of the Cement Testing Hammer PCE-HT 225 E

Images of the Cement Testing Hammer PCE-HT 225 E


Frontal view of digital cement testing hammer PCE-HT 225 E

 
The connections of the digital cement testing hammer PCE-HT 225 E incl. USB


Setting the impact angle on the display of the digital cement testing hammer


The digital cement testing hammer features a LCD display


The grindstone to even out rough surfaces, included in delivery content

 
The large delivery content of the digital cement testing hammer PCE-HT 225 E

Delivery Content of the Cement Testing Hammer PCE-HT 225 E: 
1 x Cement Testing Hammer PCE-HT 225 E, 
1 x USB cable
1 x software
1 x grindstone for rough surfaces
1 x transportation case,
1 x instruction manual

 

 

دوربین تصویربرداري حرارتی ، گرمانگار و ترموویژن FLIR

فروش دوربین های ترموویژن

دوربین های مادون قرمز

ضخامت سنج

فروش ویژه ضخامت سنج ها 

فروش محصولات Elcometer

 

فروش محصولات Defelsko

تماس با ما

تهران -میدان رسالت -خیابان فرجام شرقی- نبش میدان 39 ساختمان آرین پلاک 840/5 واحد6

 021-77130687-8

              021-77228679

      

 

JoomShaper